Python风格规范

分号

Tip

不要在行尾加分号, 也不要用分号将两条命令放在同一行.

行长度

Tip

每行不超过80个字符

例外: 如果使用Python 2.4或更早的版本, 导入模块的行可能多于80个字符.

Python会将圆括号, 中括号和花括号中的行隐式的连接起来, 你可以利用这个特点. 如果需要, 你可以在表达式外围增加一对额外的圆括号.

Yes: foo_bar(self, width, height, color='black', design=None, x='foo',
             emphasis=None, highlight=0)

     if (width == 0 and height == 0 and
         color == 'red' and emphasis == 'strong'):

如果一个文本字符串在一行放不下, 可以使用圆括号来实现隐式行连接:

x = ('This will build a very long long '
     'long long long long long long string')

注意上面例子中的元素缩进; 你可以在本文的 缩进 部分找到解释.

括号

Tip

宁缺毋滥的使用括号

除非是用于实现行连接, 否则不要在返回语句或条件语句中使用括号. 不过在元组两边使用括号是可以的.

Yes: if foo:
         bar()
     while x:
         x = bar()
     if x and y:
         bar()
     if not x:
         bar()
     return foo
     for (x, y) in dict.items(): ...
No:  if (x):
         bar()
     if not(x):
         bar()
     return (foo)

缩进

Tip

用4个空格来缩进代码

绝对不要用tab, 也不要tab和空格混用. 对于行连接的情况, 你应该要么垂直对齐换行的元素(见 行长度 部分的示例), 或者使用4空格的悬挂式缩进(这时第一行不应该有参数):

Yes:   # Aligned with opening delimiter
       foo = long_function_name(var_one, var_two,
                                var_three, var_four)

       # 4-space hanging indent; nothing on first line
       foo = long_function_name(
           var_one, var_two, var_three,
           var_four)
No:    # Stuff on first line forbidden
       foo = long_function_name(var_one, var_two,
           var_three, var_four)

       # 2-space hanging indent forbidden
       foo = long_function_name(
         var_one, var_two, var_three,
         var_four)

空行

Tip

顶级定义之间空两行, 方法定义之间空一行

顶级定义之间空两行, 比如函数或者类定义. 方法定义, 类定义与第一个方法之间, 都应该空一行. 函数或方法中, 某些地方要是你觉得合适, 就空一行.

空格

Tip

按照标准的排版规范来使用标点两边的空格

括号内不要有空格.

Yes: spam(ham[1], {eggs: 2}, [])
No:  spam( ham[ 1 ], { eggs: 2 }, [ ] )

不要在逗号, 分号, 冒号前面加空格, 但应该在它们后面加(除了在行尾).

Yes: if x == 4:
         print x, y
     x, y = y, x
No:  if x == 4 :
         print x , y
     x , y = y , x

参数列表, 索引或切片的左括号前不应加空格.

Yes: spam(1)
no: spam (1)
Yes: dict['key'] = list[index]
No:  dict ['key'] = list [index]

在二元操作符两边都加上一个空格, 比如赋值(=), 比较(==, <, >, !=, <>, <=, >=, in, not in, is, is not), 布尔(and, or, not). 至于算术操作符两边的空格该如何使用, 需要你自己好好判断. 不过两侧务必要保持一致.

Yes: x == 1
No:  x<1

当’=’用于指示关键字参数或默认参数值时, 不要在其两侧使用空格.

Yes: def complex(real, imag=0.0): return magic(r=real, i=imag)
No:  def complex(real, imag = 0.0): return magic(r = real, i = imag)

不要用空格来垂直对齐多行间的标记, 因为这会成为维护的负担(适用于:, #, =等):

Yes:
  foo = 1000  # comment
  long_name = 2  # comment that should not be aligned

  dictionary = {
      "foo": 1,
      "long_name": 2,
      }
No:
  foo       = 1000  # comment
  long_name = 2     # comment that should not be aligned

  dictionary = {
      "foo"      : 1,
      "long_name": 2,
      }

Python解释器

Tip

每个模块都应该以#!/usr/bin/env python<version>开头

模块应该以一个构造行开始, 以指定执行这个程序用到的Python解释器:

#!/usr/bin/env python2.4

总是使用最特化的版本, 例如, 使用/usr/bin/python2.4, 而不是 /usr/bin/python2. 这样, 当升级到不同的Python版本时, 能轻松找到依赖关系, 同时也避免了使用时的迷惑. 例如, /usr/bin/python2是表示/usr/bin/python2.0.1还是/usr/bin/python2.3.0?

注释

Tip

确保对模块, 函数, 方法和行内注释使用正确的风格

文档字符串

Python有一种独一无二的的注释方式: 使用文档字符串. 文档字符串是包, 模块, 类或函数里的第一个语句. 这些字符串可以通过对象的__doc__成员被自动提取, 并且被pydoc所用. (你可以在你的模块上运行pydoc试一把, 看看它长什么样). 我们对文档字符串的惯例是使用三重双引号. 一个文档字符串应该这样组织: 首先是一行以句号, 问号或惊叹号结尾的概述. 接着是一个空行. 接着是文档字符串剩下的部分, 它应该与文档字符串的第一行的第一个引号对齐. 下面有更多文档字符串的格式化规范.

模块

每个文件应该包含下列项, 依次是:

  1. 版权声明(例如, Copyright 2008 Google Inc.)
  2. 一个许可样板. 根据项目使用的许可(例如, Apache 2.0, BSD, LGPL, GPL), 选择合适的样板
  3. 作者声明, 标识文件的原作者.

函数和方法

如果不是既显然又简短, 任何函数或方法都需要一个文档字符串. 而且, 任何外部可访问的函数或方法, 不管多短多简单, 都需要文档字符串. 文档字符串应该包含函数做什么, 以及输入和输出的详细描述. 通常, 不应该描述”怎么做”, 除非是一些复杂的算法. 对于技巧性的代码, 块注释或者行内注释是最重要的. 文档字符串应该提供足够的信息, 当别人编写代码调用该函数时, 他不需要看一行代码, 只要看文档字符串就可以了. 应该给参数单独写文档. 在冒号后跟上解释, 而且应该用统一的悬挂式2或4空格缩进. 文档字符串应该在需要特定类型的地方指定期望的类型. “Raise:”部分应该列出该函数可能触发的所有异常. 生成器函数的文档字符串应该用”Yields:”而非”Returns:”.

def fetch_bigtable_rows(big_table, keys, other_silly_variable=None):
    """Fetches rows from a Bigtable.

    Retrieves rows pertaining to the given keys from the Table instance
    represented by big_table.  Silly things may happen if
    other_silly_variable is not None.

    Args:
        big_table: An open Bigtable Table instance.
        keys: A sequence of strings representing the key of each table row
            to fetch.
        other_silly_variable: Another optional variable, that has a much
            longer name than the other args, and which does nothing.

    Returns:
        A dict mapping keys to the corresponding table row data
        fetched. Each row is represented as a tuple of strings. For
        example:

        {'Serak': ('Rigel VII', 'Preparer'),
         'Zim': ('Irk', 'Invader'),
         'Lrrr': ('Omicron Persei 8', 'Emperor')}

        If a key from the keys argument is missing from the dictionary,
        then that row was not found in the table.

    Raises:
        IOError: An error occurred accessing the bigtable.Table object.
    """
    pass

类应该在其定义下有一个用于描述该类的文档字符串. 如果你的类有公共属性(Attributes), 那么文档中应该有一个属性(Attributes)段. 并且应该遵守和函数参数相同的格式.

class SampleClass(object):
    """Summary of class here.

    Longer class information....
    Longer class information....

    Attributes:
        likes_spam: A boolean indicating if we like SPAM or not.
        eggs: An integer count of the eggs we have laid.
    """

    def __init__(self, likes_spam=False):
        """Inits SampleClass with blah."""
        self.likes_spam = likes_spam
        self.eggs = 0

    def public_method(self):
        """Performs operation blah."""

块注释和行注释

最需要写注释的是代码中那些技巧性的部分. 如果你在下次代码走查的时候必须解释一下, 那么你应该现在就给它写注释. 对于复杂的操作, 应该在其操作开始前写上若干行注释. 对于不是一目了然的代码, 应在其行尾添加注释.

# We use a weighted dictionary search to find out where i is in
# the array.  We extrapolate position based on the largest num
# in the array and the array size and then do binary search to
# get the exact number.

if i & (i-1) == 0:        # true iff i is a power of 2

为了提高可读性, 注释应该至少离开代码2个空格.

另一方面, 绝不要描述代码. 假设阅读代码的人比你更懂Python, 他只是不知道你的代码要做什么.

# BAD COMMENT: Now go through the b array and make sure whenever i occurs
# the next element is i+1

Tip

如果一个类不继承自其它类, 就显式的从object继承. 嵌套类也一样.

No: class SampleClass:
        pass


    class OuterClass:

        class InnerClass:
            pass
Yes: class SampleClass(object):
         pass


     class OuterClass(object):

         class InnerClass(object):
             pass


     class ChildClass(ParentClass):
         """Explicitly inherits from another class already."""

继承自 object 是为了使属性(properties)正常工作, 并且这样可以保护你的代码, 使其不受Python 3000的一个特殊的潜在不兼容性影响. 这样做也定义了一些特殊的方法, 这些方法实现了对象的默认语义, 包括 __new__, __init__, __delattr__, __getattribute__, __setattr__, __hash__, __repr__, and __str__ .

字符串

Tip

用%操作符格式化字符串, 即使参数都是字符串. 不过也不能一概而论, 你需要在+和%之间好好判定.

No: x = '%s%s' % (a, b)  # use + in this case
    x = imperative + ', ' + expletive + '!'
    x = 'name: ' + name + '; score: ' + str(n)
Yes: x = a + b
     x = '%s, %s!' % (imperative, expletive)
     x = 'name: %s; score: %d' % (name, n)

避免在循环中用+和+=操作符来累加字符串. 由于字符串是不可变的, 这样做会创建不必要的临时对象, 并且导致二次方而不是线性的运行时间. 作为替代方案, 你可以将每个子串加入列表, 然后在循环结束后用 .join 连接列表. (也可以将每个子串写入一个 cStringIO.StringIO 缓存中.)

No: employee_table = '<table>'
    for last_name, first_name in employee_list:
        employee_table += '<tr><td>%s, %s</td></tr>' % (last_name, first_name)
    employee_table += '</table>'
Yes: items = ['<table>']
     for last_name, first_name in employee_list:
         items.append('<tr><td>%s, %s</td></tr>' % (last_name, first_name))
     items.append('</table>')
     employee_table = ''.join(items)

为多行字符串使用三重双引号而非三重单引号. 不过要注意, 通常用隐式行连接更清晰, 因为多行字符串与程序其他部分的缩进方式不一致.

No:
    print """This is pretty ugly.
Don't do this.
"""
Yes:
  print ("This is much nicer.\n"
         "Do it this way.\n")

TODO注释

Tip

为临时代码使用TODO注释, 它是一种短期解决方案. 不算完美, 但够好了.

TODO注释应该在所有开头处包含”TODO”字符串, 紧跟着是用括号括起来的你的名字, email地址或其它标识符. 然后是一个可选的冒号. 接着必须有一行注释, 解释要做什么. 主要目的是为了有一个统一的TODO格式, 这样添加注释的人就可以搜索到(并可以按需提供更多细节). 写了TODO注释并不保证写的人会亲自解决问题.

# TODO(kl@gmail.com): Drop the use of "has_key".
# TODO(Zeke) change this to use relations.

如果你的TODO是”将来做某事”的形式, 那么请确保你包含了一个指定的日期(“2009年11月解决”)或者一个特定的事件(“等到所有的客户都可以处理XML请求就移除这些代码”).

导入格式

Tip

每个导入应该独占一行

Yes: import os
     import sys
No:  import os, sys

导入总应该放在文件顶部, 位于模块注释和文档字符串之后, 模块全局变量和常量之前. 导入应该按照从最通用到最不通用的顺序分组:

  1. 标准库导入
  2. 第三方库导入
  3. 应用程序指定导入

每种分组中, 应该根据每个模块的完整包路径按字典序排序, 忽略大小写.

import foo
from foo import bar
from foo.bar import baz
from foo.bar import Quux
from Foob import ar

语句

Tip

通常每个语句应该独占一行

不过, 如果测试结果与测试语句在一行放得下, 你也可以将它们放在同一行. 如果是if语句, 只有在没有else时才能这样做. 特别地, 绝不要对 try/except 这样做, 因为try和except不能放在同一行.

Yes:

  if foo: bar(foo)
No:

  if foo: bar(foo)
  else:   baz(foo)

  try:               bar(foo)
  except ValueError: baz(foo)

  try:
      bar(foo)
  except ValueError: baz(foo)

访问控制

Tip

在Python中, 对于琐碎又不太重要的访问函数, 你应该直接使用公有变量来取代它们, 这样可以避免额外的函数调用开销. 当添加更多功能时, 你可以用属性(property)来保持语法的一致性.

(译者注: 重视封装的面向对象程序员看到这个可能会很反感, 因为他们一直被教育: 所有成员变量都必须是私有的! 其实, 那真的是有点麻烦啊. 试着去接受Pythonic哲学吧)

另一方面, 如果访问更复杂, 或者变量的访问开销很显著, 那么你应该使用像 get_foo()set_foo() 这样的函数调用. 如果之前的代码行为允许通过属性(property)访问 , 那么就不要将新的访问函数与属性绑定. 这样, 任何试图通过老方法访问变量的代码就没法运行, 使用者也就会意识到复杂性发生了变化.

命名

Tip

module_name, package_name, ClassName, method_name, ExceptionName, function_name, GLOBAL_VAR_NAME, instance_var_name, function_parameter_name, local_var_name.

应该避免的名称

  1. 单字符名称, 除了计数器和迭代器.
  2. 包/模块名中的连字符(-)
  3. 双下划线开头并结尾的名称(Python保留, 例如__init__)

命名约定

  1. 所谓”内部(Internal)”表示仅模块内可用, 或者, 在类内是保护或私有的.
  2. 用单下划线(_)开头表示模块变量或函数是protected的(使用import * from时不会包含).
  3. 用双下划线(__)开头的实例变量或方法表示类内私有.
  4. 将相关的类和顶级函数放在同一个模块里. 不像Java, 没必要限制一个类一个模块.
  5. 对类名使用大写字母开头的单词(如CapWords, 即Pascal风格), 但是模块名应该用小写加下划线的方式(如lower_with_under.py). 尽管已经有很多现存的模块使用类似于CapWords.py这样的命名, 但现在已经不鼓励这样做, 因为如果模块名碰巧和类名一致, 这会让人困扰.

Python之父Guido推荐的规范

Type Public Internal
Modules lower_with_under _lower_with_under
Packages lower_with_under  
Classes CapWords _CapWords
Exceptions CapWords  
Functions lower_with_under() _lower_with_under()
Global/Class Constants CAPS_WITH_UNDER _CAPS_WITH_UNDER
Global/Class Variables lower_with_under _lower_with_under
Instance Variables lower_with_under _lower_with_under (protected) or __lower_with_under (private)
Method Names lower_with_under() _lower_with_under() (protected) or __lower_with_under() (private)
Function/Method Parameters lower_with_under  
Local Variables lower_with_under  

Main

Tip

即使是一个打算被用作脚本的文件, 也应该是可导入的. 并且简单的导入不应该导致这个脚本的主功能(main functionality)被执行, 这是一种副作用. 主功能应该放在一个main()函数中.

在Python中, pychecker, pydoc以及单元测试要求模块必须是可导入的. 你的代码应该在执行主程序前总是检查 if __name__ == '__main__' , 这样当模块被导入时主程序就不会被执行.

def main():
      ...

if __name__ == '__main__':
    main()

所有的顶级代码在模块导入时都会被执行. 要小心不要去调用函数, 创建对象, 或者执行那些不应该在使用pychecker或pydoc时执行的操作.